1 WPE							!     V5.210
 WPE							      V5.2

 WPE is an interactive text editor built using the VAX Text
 Processing Utility and the EVE interface.  WPE emulates the
 WPE-PLUS editor with extended functions for text file editing.

 WPE commands are normally entered using the keypad on the
 terminal (and the function keys on VT2xx/VT3xx terminals).  See
 the WPE users guide for more information. 
 
 +----------------------------------------------------------------+
 | o  For a list of WPE commands, type ? or LIST.                 |
 | o  To see what's new in V5.2 of WPE, type NEW FEATURES.        |
 | o  For information on differences between this version of WPE  |
 |         and previous versions, type DIFFERENCES.               |
 | o  To get to help on EVE, type EVE.                            |
 | o  To get to help on VAXTPU, type TPU.                         |
 +----------------------------------------------------------------+
 
1 COMMANDS
 List of Topics

 For help on WPE topics, type the name of a topic and press RETURN.

    ~I~
    o  To exit from help and resume editing, press RETURN.

 TEXT-EDITING COMMANDS

    Delete Line         Delete To EOL      Escape           Signature
    Return              Gold Return        Quote

 CURSOR MOVEMENT AND SCROLLING

    Find Matching     Token              Shift Right        Shift Left
    Mark              Go To (Mark)       Paragraph

 FILE, BUFFER, AND WINDOW COMMANDS

    Get File          Include File     
    One Window        Two Windows        Other Window       
    Buffer            Select Buffer
    Change Width      View               Display Char
    Write File        Shift Right        Shift Left

 TEXT-FORMATTING COMMANDS
 
    Paginate          New Page           Page Marker       
    CTlength          Set Page Length    NoTabs

 KEY-DEFINITION COMMANDS

    Application           Numeric                  Set Keypad WPE
    Set Keypad WPS        Set Keypad EDT           Set Keypad EDW
    Set Key NoWPS         Set Key NoEDT            Set Key NoEDW
    Set Keypad Num        Set Key NoNum            Set Keypad App
 
 CUSTOMIZING AND ADVANCED FEATURES

    Fix                   Print UnTrans            Print Trans
    Return to Edit        EtoA                     AtoE
    EVE                   TPU

 INFORMATIONAL TOPICS

    New Features
    Differences (WPE V2.4 to V5.0/5.2)             WPS Differences
    Keypad (diagram)      Keys (list)              List of Topics
    Ctrl Commands         Special Comds            Gold Keys
    VT100 Commands        Function Keys            EDT Keypad
    Mail Editing
 
1 APPLICATION
 Application

 Cancels the NUMERIC keypad, restoring the keypad to the WPE state
 or the EDW state

 Effectively, this is the same as SET KEYPAD WPE or SET KEYPAD EDW.

 o  For a list of defined keys, see help on KEYS or press GOLD/HELP
    (on the mini keypad).

 o  For a keypad diagram, see help on KEYPAD or press HELP.

 Related topics:

    SET KEYPAD WPE   SET KEYPAD EDW

1 ATOE
 AtoE
 
 Translate the entire buffer, or a selected part of the 
 buffer, from the ASCII character set to the EBCDIC
 character set.
 
 The translation table used is similar to the translation
 for the 2780/3780 Protocol Emulator.  Except for a few
 special characters, the translation is reversable by
 using the ETOA command.
 
1 BUFFER
 Buffer (<Gold> F19)

 Puts a buffer into the current window -- for example, to edit another
 file, view the messages you have received, or create a temporary storage
 area or "scratchpad."

 Example:

      <Gold> F19       Buffer: jabber.txt

 Puts a buffer called JABBER.TXT in the main (or current) window.

 o  If the buffer already exists, the cursor returns to your last position
    in that buffer.  The settings of that buffer apply to your edits
    (direction, margins, mode, tab stops, and wrap).

 o  If you are creating a buffer, the cursor moves to the top of the new
    buffer.  The new buffer has the same settings as the $DEFAULTS$ buffer.
    See help on DEFAULTS.

 o  You can abbreviate the buffer name.  If more than one name matches your
    request, WPE shows a list of the matching names and recalls the BUFFER
    command so you can choose the one you want.  Typically, a buffer has
    the same name as the file it contains.  To check buffer names, use SHOW
    BUFFERS or SHOW SYSTEM BUFFERS.   You can also use the up_arrow at the 
    "Buffer:" prompt to select from a list of your current buffers

 o  You can also use the BUFFER command to view a system buffer, such as
    the messages buffer, help buffer, or DCL buffer.  See help on MESSAGE
    BUFFER.

 o  Sometimes, bottom-line messages are displayed too rapidly to read.
    You can use the BUFFER command to see these messages by typing: 

      <Gold> F19       Buffer: messages

1 CHANGE_WIDTH
 Change Width (<Gold> E)

 Changes the display (screen) width for all buffers.  If the
 current width is 80 columns, the display is changed to 132
 columns.  If the current width is 132, it is changed to 80.

 Pressing <Gold> E invokes this command.
 
1 CTLENGTH
 Current Text Length
 
 The Current Text Length (CT) governs the length of the page that
 is used by the PAGINATE function (<Gold> PF2).  
 
 The default value for CT is 60 lines per page.  To change it,
 press the DO key.  Enter Command: CT and the new value you wish to use.
 
1 CTRL_COMMANDS
 WPE Ctrl Commands.
 
 Press  Ctrl  simultaneously with another key (upper
 and lower case are equivalent):
 
 Ctrl_B - Recall last Command:
 Ctrl_F - Return to editing buffer (from Show, etc.)
 Ctrl_K - Learn 
 Ctrl_L - Learn 
 Ctrl_R - Remember (after Command: Learn)
 Ctrl_V - Quote (Press the key to be added:)
 Ctrl_W - Refresh (repaint) the screen.
 Ctrl_Z - Exit.
 
                Seldom used:
 Ctrl_H - Move to start of current line.
 Ctrl_U - Erase to start of current line.
 
1 DELETE_LINE
 Delete Line (F6)

 Deletes the line the cursor is on.
 
 The F6 (Del Line) key invokes this function.
 
 The last-deleted line is kept in the internal Line Buffer, and
 may be restored by pressing <Gold> F6. 
 
1 DELETE_TO_EOL
 Delete To End Of Line (F20)

 Deletes from the current cursor position to the end of the
 current line, but does not append the next line to the current
 line.
 
 The F20 key invokes this function

 The last-deleted line segment is kept in the internal Word
 Buffer, and may be restored by pressing <Gold> Del Word
 (<Gold> PF3).
 
1 DIFFERENCES 
 Differences between WPE Version 2.5 and Version 5.0/5.2

 If you have previously used WPE version 2.5, you will be
 interested in knowing what has changed in WPE.  Version 2.5 of WPE
 was the last version usable on VMS Version 4.x.  WPE was completely
 rewritten for VMS Version 5.0, and that version of WPE was also
 numbered 5.0.  The current version of WPE is 5.2 (corresponding
 to VMS Version 5.2) (There were no WPE Versions 3.x or 4.x).
 
 This article is in 3 sections, describing the CHANGES and then
 the NEW FEATURES of WPE Version 5.0 and WPE Version 5.2
 

            ========================================
            ----  CHANGES FROM WPE VERSION 2.5  ----
            ========================================
 
 The 8-character "hot zone" at the right margin (for wrapping) has
 been eliminated in WPE Version 5.
 
 You are no longer asked about tailoring for .HLP files - WPE now
 automatically tailors the editing environment (right margin 66).
 
 WPE automatically tailors itself for .COM, .TPU, and .FOR files. 
 You are not specifically told that it has done so.
 
 Files are not checked for "long lines", and you are no longer
 asked if you want to go to 132-column mode.
 
 The structure and organization of Help has been changed.
 
 Forward and Backward scrolling now terminates if you press any key
 (Ctrl/C not recommended).  Scrolling is chosen by <Gold> Advance
 and BackUp.  <Gold> Up-Arrow and Down-Arrow, which were previously
 scrolling, now are Top-of-File and Bottom-of-File.
 
 KP3 is now mapped to UpperCase/LowerCase, instead of Exit.
 
 The behavior of Paginate has changed slightly.  It now inserts
 FF-NL (a new type of page marker), and automatically re-paginates
 these markers when used again.
 
 
        =================================================
        ----  NEW FEATURES ADDED IN WPE VERSION 5.0  ----
        =================================================
 
 When you exit WPE, and then edit the same file again by just
 entering the WPE command (no filename), you are returned to the
 place in the file where you were last editing.
 
 DECspell (if installed on your system) is integrated into WPE for
 spell-checking.
 
 <Gold> number or numbers may be used instead of the command REPEAT
 nn.
 
 An optional EDT keypad has been provided.
 
 A visual representation of Tab settings (a "ruler") is provided,
 rather than a message.  The method of changing these settings has
 changed.
 
 Command Recall has been made much more versatile.
 
 More than 2 screen windows are now supported.  The "2 windows"
 function splits the current window into two, providing up to 8
 windows.
 
 Capability to print from within WPE, without translating control
 characters, has been added to the previous print-translated
 capability.
 
 The NoTab mode now uses current Tab settings, rather than setting
 tabs to "every 8".
 
 Capability to toggle between 80-column and 132-column mode (<Gold>
 E) has been added.
 
 Wildcard Find capability has been added, and assigned to <Gold>
 Find.
 
 There are now 2 types of page markers.  <Gold> N inserts a "hard"
 page marker (FF), while <Gold> P inserts a "soft" page marker
 (FF-NL).
 
 Buffer recall now allows you to delete a buffer, in addition to
 changing buffers.
 
 Placing the cursor at the end of a line (possibly by using <Gold>
 Rignt-Arrow) and then pressing <Gold> Right-Arrow will now do
 SHIFT RIGHT 8.  Similarly, placing the cursor at the start of a
 line and pressing <Gold> Left-Arrow will do SHIFT LEFT 8.

 Mail editing has been significantly improved, and may now be 
 accessed via callable TPU, rather than in a subprocess.

 MORE now activates TPU only once, regardless of the number or
 type  of file selections made.

 WPE can now be installed to use a DCL command, rather than using
 a .COM file.
 
 
        =================================================
        ----  NEW FEATURES ADDED IN WPE VERSION 5.2  ----
        =================================================
 
 New commands ETOA and ATOE have been added.  These commands
 translate the current buffer (or a selected region) from EBCDIC
 to ASCII (etoa), or from ASCII to EBCDIC (atoe).
 
 The Paragraph function (KP5 key) will now find: 
  o  the next procedure if you are editing a .TPU file
  o  the next help topic if you are editing a .HLP file
 
 The Print command will now spawn a subprocess if the printer
 command begins with the characters DM$ - this allows usage of
 special procedures such as DM$ATP.COM, which prints to an
 attached printer.
 
 The <Gold>F18 and <Gold>G functions will access a file using a
 filename that you have SELected, if a file with that name exists.

 If there is only one window on the screen, the F19 key now toggles 
 among your active buffers (previously, you got an error message
 unless there were two or more windows).
 
 
   +-------------------------------------------------+
   | Features available only with EVE T2.2 and above |
   +-------------------------------------------------+
 
 EVE Version T2.2 was shipped with VMS V5.1.  If WPE was built
 using EVE T2.2 (or above), some additional features are
 available.  You can determine the build-version of EVE by
 pressing <Gold>Z (outside of the help screens).  The build
 information is shown at the bottom of the screen.
 
 If you enter an ambiguous command, the F19 key will now move 
 between the command line and the CHOICES buffer.  Selecting a
 choice may be done by pressing the SELect key.  Pressing the 
 DO key will then execute the command.
 
 See the VMS documentation for other features added to EVE.
 
1 DISPLAY_CHAR
 Display Current Character (<Gold> ?)
 
 Displays information about the character at the cursor location.
 The information includes the character or its mnemonic, and the
 character value in decimal, octal, and hexidecimal.  The control
 key for the character is also displayed, where appropriate.
 
 For example: ( form feed )
 
 Current character is <FF> Decimal = 12, Octal = 014, Hex = 0C ^L

 Press <Gold> ? to invoke the DISPLAY CHARACTER function.
 
1 EDT_KEYPAD
 EDT Keypad

 WPE now provides an optional EDT keypad, instead of the WPS keypad.  The
 system manager can assist you if you wish to have this as your "default"
 (startup) mode for WPE.  The EDT-default editor is called EDW.

 The EDT keypad is an addition to WPE.  Therefore, all non-EDT additions of
 WPE (<Gold> keys, extended commands, etc.) are still present.  Consult EDT
 documentation for EDT keypad functions.

 When you are in the editor, you can change the keypad to EDT mode by using
 either of the Commands:
	SET KEYPAD EDW
	SET KEYPAD EDT

 To restore the keypad to WPS mode, you may use any of the Commands:
	SET KEYPAD WPE
	SET KEYPAD WPS
	SET KEYPAD NOEDW
	SET KEYPAD NOEDT

1 ESCAPE
 Escape (<Gold> F7)
 
 Inserts an Escape character (ascii 27) in your text at the
 current location.
 
 This function is useful for constructing terminal control
 sequences, which often start with "Escape [".  The Escape
 character will be displayed on your screen as a backwards
 question mark.
 
 Press <Gold> F7 to insert an Escape character.
 
  VT100: CTRL/V            Press the key to be added:  CTRL/[ 
 
1 ETOA
 EtoA
 
 Translate the entire buffer, or a selected part of the 
 buffer, from the EBCDIC character set to the ASCII
 character set.
 
 The translation table used is similar to the translation
 for the 2780/3780 Protocol Emulator.  Except for a few
 special characters, the translation is reversable by
 using the ATOE command.
 
1 FIND_MATCHING
 Find Matching ')' (<Gold> X)
 
 Position the cursor to a left parenthesis ( and press <Gold> X.  
 WPE will search for the matching right parenthesis ), even if
 you have a complex nested structure.  The pair of parentheses
 will be highlighted in reverse video, and the line containing
 the matching item will be displayed at the bottom of the screen.
 
 You then have a choice of erasing the highlighting, moving
 to the matched right parenthesis, or returning to editing.
 
 You may later erase the highlighted markers by positioning
 to something other than a '(' and pressing <Gold> X.
 
 While the highlighting remains, do not confuse the position of
 the markers with the matched items.  If you add or delete
 text, the markers will remain but they may be wrong (markers
 are tied to positions in the buffer, not to characters).
 
 <Gold> X invokes the 'Find Matching )' function.
 
1 FIX
 Fix
 
 Removes CR and LF characters from the current buffer.  This
 command is most frequently used to "clean up" .MEM files and
 other files with explicit formatting.
 
1 FUNCTION_KEYS
 Function Keys
 
 Function Keys F6 thru F14 for VT-2xx/3xx terminals.
 
 (To see F15 thru F20, type KEYPAD or press the HELP Key)
 
     F6      F7      F8      F9      F10       F11     F12     F13     F14
 +---------------------------------------+  +-------------------------------+
 |DELETE | QUOTE |  CAP  |       |       |  |FORWARD| MOVE  | ERASE |INSERT |
 | LINE  |       | WORD  |       | EXIT  |  |REVERSE|  BY   | WORD  |OVERSTR|
 |-------|-------|-------|       |       |  |TOGGLE | LINE  |-------|TOGGLE |
 |UNDELLN|ESCAPE |UPPERWD|       |       |  |       |       |RUBSENT|       |
 +---------------------------------------+  +-------------------------------+
 
1 GET_FILE
 Get File (<Gold> F18)

 Opens a file you specify, putting it into the current EVE window.  This
 lets you edit or create another file in the same session.  (Same as the
 OPEN command.)

 You specify a file by typing it's name at the 'File to get:'
 prompt, after you press <Gold> F18.
 
 You may also specify a file by SELECTing text with the filename
 in any of your buffers.  One way to use this feature is to:
 
 o  Use the <Gold>I command to put a directory listing in the DCL
    buffer.  For the current directory, the command DIRECTORY is
    sufficient.  For other directories, use the command
    DIRECTORY/NOHEADER so that the complete file specification is
    shown in the DCL buffer.
 
 o  Move the cursor to the DCL buffer, and position to the start
    of the filename you wish.  Press a SELect key, and then press 
    the 'Word' key (KP4).
 
 o  Press <Gold> F18
 
 
 Example: (prompted method)

    The following command opens a file called MEMO.TXT in your current
    (default) directory:

        (<Gold> F18)		File to get:  memo.txt
 

 o  Opening a file for the first time creates a buffer named after that
    file.  If there is already a buffer by that name, EVE asks for a
    different name to use.  The new buffer has same settings as the
    $DEFAULTS$ buffer.  (See help on Defaults.)

 o  If you specify a file you have already opened in the editing session,
    EVE returns to your last location in the buffer for that file, if the
    buffer still exists.

 o  You can use logical names and wildcards in the file specification.  If
    more than one file matches your request, EVE shows a list of matching
    files to choose from.  (See help on Choices Buffer.) You can open
    several files in an editing session, but only one per command.

 o  If you make a mistake in specifying the file, use the DELETE BUFFER
    command to discard the buffer.

 Related topics:

    DELETE BUFFER    OPEN SELECTED    SAVE FILE    SAVE FILE AS
 
1 GO_TO
 Go To (<Gold> KP9)

 Moves the cursor to the previously marked text.  (See MARK.) For
 example,

     <Gold> KP9         Go to: glossary

 moves the cursor to the position that was named "glossary" by an
 earlier mark command.  Mark names may be abbreviated.

 If the new position is not in the current buffer, the cursor still
 moves to the new position.  A new buffer is mapped to the current
 window if necessary.

 The SHOW (<Gold> Z) command displays the names of all the marks
 in each buffer.  Mark names are case-insensitive. 
 
 The KP9 key is labeled "Under Line" on WPS+ keyboards.
 
1 GOLD_KEYS
 Press GOLD (PF1) and then another key...

 GOLD B - Bottom of file        GOLD [ - DO Command
 GOLD C - Center text           GOLD < - Prev Screen
 GOLD E - Toggle screen width   GOLD > - Next Screen
 GOLD F - File (Exit)           GOLD , - Search
 GOLD G - Get file (Include)    GOLD . - Cont Srch
 GOLD H - Help                  GOLD / - Cont Srch Sel
 GOLD I - 1 DCL Command         GOLD ? - Display Char
 GOLD K - Quit.                 GOLD ; - Global Replc
 GOLD N - NewPage mark          GOLD ' - Replc
 GOLD P - Page mark             GOLD \ - Insert Date 
 GOLD R - Show tab settings     GOLD | - Show line
 GOLD T - Top of file           GOLD @ - Signature
 GOLD V - View tabs             GOLD $ - Spawn
 GOLD W - Write file            GOLD <X] - Erase SOL 
 GOLD X - Find matching )       
 GOLD (, ), {, }, or "  - Insert paired () or [] or ""
 GOLD Return - (.FOR, .COM, .TPU, .HLP) Comment Line
 
  VT100: <Gold> [  (DO)          Command:  
 
1 GOLD_RETURN
 <Gold> Return

 If the file type is .COM, .TPU, .HLP, or .FOR, inserts a comment
 line before the current cursor position, moving the cursor to the
 start of the new line.  The comment line begins with "$ ! ", "! "
 or "C", as appropriate.

 For other file types, a message indicates that "Para Marker is
 not implemented in WPE." 
 
 Note:  In these special files, the space bar will also
 automatically insert another comment line if you type too far. 
 Therefore, you may usually just keep typing until you are
 finished with your comment.
  
 The <Gold> RETURN key invokes this command.
 
1 HELP
 Help                    VT100: <Gold> H 

 Provides help on keypad commands.  After pressing HELP, press the
 key that you want HELP on.  Press RETURN to leave help.

 To get help on more advanced commands, use the HELP command.
 Press the DO key, type help, and press RETURN.  The HELP command
 will then provide you with a list of all the EVE commands.  Type
 the name of the command that you want help on, or type ?  to see
 the list of commands again.  
 
 At that point, you may also type WPE for help on the WPE
 extensions to EVE, or type TPU for help on the TPU editor.
 
 Press RETURN without typing anything in order to leave the HELP
 command. 

 You can ask for help on a particular command in one step.  For
 example,

      help wpe

 will provide help on the WPE editing environment.

  VT100: <Gold> [                Command: help wpe
 
1 INCLUDE_FILE
 Include File ( <Gold>G )

 Includes a file into the current buffer, inserting it before the start of
 the current line.  This is useful to combine files.

 You specify a file by typing it's name at the 'File to include:'
 prompt, after you press <Gold>G.
 
 You may also specify a file by SELECTing text with the filename
 in any of your buffers.  One way to use this feature is to:
 
 o  Use the <Gold>I command to put a directory listing in the DCL
    buffer.  For the current directory, the command DIRECTORY is
    sufficient.  For other directories, use the command
    DIRECTORY/NOHEADER so that the complete file specification is
    shown in the DCL buffer.
 
 o  Move the cursor to the DCL buffer, and position to the start
    of the filename you wish.  Press a SELect key, and then press 
    the 'Word' key (KP4).
 
 o  Move the cursor to the buffer and place where you want to
    include all of the text from the selected file.
 
 o  Press <Gold>G
 
 

 Example: (prompting method)

    The following command includes a file called MEMO.TXT from your current
    (default) directory:

       INCLUDE FILE memo.txt

 o  You can use logical names and wildcards in the file specification.  If
    more than one file matches your request, EVE shows a list of matching
    files for you to choose from.  (See help on Choices Buffer.) You can
    include several files in a buffer, but only one per command.

 o  Including a file does not change the buffer name, the output file
    specification associated with the buffer (if any), or any buffer
    settings, such as margins and tabs.

 o  The cursor remains on the current character.  The text of the included
    file is inserted whether the mode of the buffer is insert or overstrike.

 Key:  The WPS keypad defines GOLD-G as INCLUDE FILE.

 Related topics:

    GET FILE    OPEN    OPEN SELECTED
 
1 MARK 
 Mark (KP9)

 Adds bookmarks to your current editing session.  MARK adds a
 bookmark at the current cursor position.  The mark is a character
 or word which names the position.  You can come back to a marked
 position by using the GO TO command.  This command is useful if
 you are editing a large file and want to go back to a particular
 section; it avoids searching throughout the file.

 For example,

     KP9                Mark name: glossary

 adds a mark called "glossary" at the current cursor position.  You
 can return to this position later by using "go to glossary"
 (<Gold>) KP9).
 
1 MAIL_EDITING
 Using WPE as your VMS Mail editor

 It is possible to use WPE as the editor for messages you send
 using VMS  Mail (VAXMail).  The system manager may have already
 provided this  capability - and you will see the wpe or edw when
 you send mail.

 If not, first enter the following command at the DCL ($) prompt:

     $ SHOW SYMBOL MAIL
 
     	       See if MAIL is defined as "MAIL/EDIT" (there may be other 
               qualifiers, also).  If this is not the case, edit your 
               LOGIN.COM file to include the line:
     	       $ MAI*L :== MAIL/EDIT=(SEND,REPLY=EXTRACT)


 Now enter the mail system.  At the MAIL> prompt, type:

     MAIL> SHOW EDITOR
     	       See if it says "Your editor is TPU".  If not, type:
     	       MAIL> SET EDITOR TPU


 Now, logout and back in.  Try the mail system to see if your
 editor is  set correctly.  If this doesn't work, see the system
 manager for  assistance.

 With the WPE interface, when you reply to mail, the memo you are 
 answering appears in a small window at the top of the screen. 
 You  create you answer in the bottom window.

1 NEW_FEATURES 
 This article is in two parts: 
      New features added in WPE Version 5.0, and 5.2
 
   +---------------------------------------+
   | New Features added in WPE Version 5.0 |
   +---------------------------------------+
 
 When you exit WPE, and then edit the same file again by just
 entering the WPE command (no filename), you are returned to the
 place in the file where you were last editing.
 
 DECspell (if installed on your system) is integrated into WPE for
 spell-checking.
 
 <Gold> number or numbers may be used instead of the command REPEAT
 nn.
 
 An optional EDT keypad has been provided.
 
 A visual representation of Tab settings (a "ruler") is provided,
 rather than a message.  The method of changing these settings has
 changed.
 
 Command Recall has been made much more versatile.
 
 More than 2 screen windows are now supported.  The "2 windows"
 function splits the current window into two, providing up to 8
 windows.
 
 Capability to print from within WPE, without translating control
 characters, has been added to the previous print-translated
 capability.
 
 The NoTab mode now uses current Tab settings, rather than setting
 tabs to "every 8".
 
 Capability to toggle between 80-column and 132-column mode (<Gold>
 E) has been added.
 
 Wildcard Find capability has been added, and assigned to <Gold>
 Find.
 
 There are now 2 types of page markers.  <Gold> N inserts a "hard"
 page marker (FF), while <Gold> P inserts a "soft" page marker
 (FF-NL).
 
 Buffer recall now allows you to delete a buffer, in addition to
 changing buffers.
 
 Capability has been added to shift the screen left and right.

 Mail editing has been significantly improved, and may now be 
 accessed via callable TPU, rather than in a subprocess.

 MORE now activates TPU only once, regardless of the number or
 type  of file selections made.

 WPE can now be installed to use a DCL command, rather than using
 a .COM file.

   +---------------------------------------+
   | New features added in WPE Version 5.2 |
   +---------------------------------------+
 
 New commands ETOA and ATOE have been added.  These commands
 translate the current buffer (or a selected region) from EBCDIC
 to ASCII (etoa), or from ASCII to EBCDIC (atoe).
 
 The Paragraph function (KP5 key) will now find: 
  o  the next procedure if you are editing a .TPU file
  o  the next help topic if you are editing a .HLP file
 
 The Print command will now spawn a subprocess if the printer
 command begins with the characters DM$ - this allows usage of
 special procedures such as DM$ATP.COM, which prints to an
 attached printer.
 
 The <Gold>F18 and <Gold>G functions will access a file using a
 filename that you have SELected, if a file with that name exists.

 If there is only one window on the screen, the F19 key now toggles 
 among your active buffers (previously, you got an error message
 unless there were two or more windows).
 
 
   +-------------------------------------------------+
   | Features available only with EVE T2.2 and above |
   +-------------------------------------------------+
 
 EVE Version T2.2 was shipped with VMS V5.1.  If WPE was built
 using EVE T2.2 (or above), some additional features are
 available.  You can determine the build-version of EVE by
 pressing <Gold>Z (outside of the help screens).  The build
 information is shown at the bottom of the screen.
 
 If you enter an ambiguous command, the F19 key will now move 
 between the command line and the CHOICES buffer.  Selecting a
 choice may be done by pressing the SELect key.  Pressing the 
 DO key will then execute the command.
 
 See the VMS documentation for other features added to EVE.
 
1 NEW_PAGE
 New Page (<Gold> N)
 
 Inserts a "hard" page break -- a form feed (appearing as a small FF) on a
 line by itself.

 o  If you are NOT at the start of a line, WPE first does a RETURN, then
    inserts a form feed, and puts the cursor after the form feed.

 o  At the start of a line of text, WPE inserts a form feed puts the 
    cursor after the form feed.

 o  At the start of a blank line, WPE inserts the form feed and puts the
    cursor at start of the next line -- without doing a RETURN.

 To erase a page break use MOVE BY PAGE to put the cursor on a form feed;
 then use ERASE LINE or a similar EDT or WPS keypad function.

 Keys:  WPE defines CTRL/L as INSERT PAGE BREAK.  The WPS keypad defines
        GOLD/N.  (See help on WPS DIFFERENCES.)
 
 Note that "New Page" and "Page Marker" are different in WPE.
 
1 NOTABS
 NoTabs
 
 Replaces all tab characters in the current buffer with an
 appropriate number of spaces, and redefines the TAB key to insert
 spaces.
 
1 NOT_IMPLEMENTED
  WPS+ FEATURE WHICH IS NOT IMPLEMENTED IN WPE 

 The key that you pressed has a defined meaning in WPS+.  However,
 that feature has not been implemented in WPE.  This might be
 because the feature did not seem to be reasonable for an ASCII
 text editor, or because a full implementation would have been
 extremely difficult (we chickened out).  
 
 You may use the DEFINE KEY command or the LEARN and REMEMBER
 commands to assign a command to this key.
 
1 NUMERIC
 Numeric

 Sets the default, numeric keypad, retaining previous definitions of
 other keys, such as EDT or WPS, except for the numeric.

 For example:

    o  The GOLD key may still be set.
    o  The four PF keys may still be defined.
    o  Pressing KP8 is the same as typing the number 8, pressing COMMA (on
       the keypad) is the same as typing a comma, and so on.

 For a keypad diagram, see help on KEYPAD or press HELP.
 For a list of defined keys, see help on KEYS.

1 ONE_WINDOW
 One Window (F17)

 Restores a single, large window when the EVE main window is split into two
 or more windows.

 Steps:

    1.  Put the cursor anywhere in the window you want to keep.  (See help
        on the F19 key or the NEXT WINDOW or PREVIOUS WINDOW commands.)

    2.  Press the F17 key.

 o  WPE then deletes all the windows except the one you are currently
    using.  The buffers associated with those windows are not deleted.

 o  You can also use F17 after using the DCL command, which uses a
    second window to show the DCL output.  See help on DCL.

 o  For more information about using multiple windows, see help on Windows.

 Related topics:

    Help on keys F18, F19
    DELETE WINDOW    SHRINK WINDOW    SPLIT WINDOW    TWO WINDOWS
 
1 OTHER_WINDOW
 Other Window (F19)
 
 This command moves the cursor to another editing buffer or
 window.  The effect of the command depends on whether you
 currently have ONE window, or MORE THAN ONE windows.
 
 IF YOU CURRENTLY HAVE ONE WINDOW:
 ================================
 
 Puts your next buffer into the current EVE window, returning to your last
 position in that buffer.

 This lets you toggle between different buffers or cycle through several
 buffers without having to type their names.

 Steps:

    1.  Use the F19 key.
 
    2.  Repeat step 1 to continue cycling through your buffers.

 If you have only two buffers, repeating F19 toggles between them.
 If you have more than two buffers, the next buffer is determined by the
 order in which you created the buffers.  For a list of your buffers, use
 the SHOW BUFFERS command.

 
 IF YOU CURRENTLY HAVE MORE THAN ONE WINDOW:
 ==========================================

 Puts the cursor at your last position in the next window, if you are using
 two or more windows in EVE.  (Same as NEXT WINDOW).

 o  For example, if you are using three windows like this:

    +-----------------+    From the top window, the cursor returns to
    |  [] cursor      |    your last position in the middle window.
    |_________________|
    |      []         |    From the middle window, the cursor returns to
    |_________________|    your last position in the the bottom window.
    |[]               |
    |                 |    From the bottom window, the cursor returns to
    +-----------------+    your last position in the top window.

 o  For more information about using multiple windows, see help on Windows.

 o  If the Choices buffer is displayed, you can press the F19 key 
    to move between the Choices buffer and the command line.
    See help on Choices Buffer.

 Related topics:

    help on keys F17, F18
    NEXT WINDOW    PREVIOUS WINDOW    SPLIT WINDOW    TWO WINDOWS
    BUFFER         DELETE BUFFER      SHOW BUFFERS    STATUS LINE
 
1 PAGE_MARKER
 WPS Page Marker

 Inserts a page marker or "soft" page break at the start of a line and
 positions the cursor after the marker.

 o  A soft page break is a form feed followed by the null character
    (appearing as a small FF and a small NL).

 o  By contrast, a "hard" page break (inserted with CTRL/L) is a form feed
    only (small FF).

 Keys:  The WPS keypad defines these keys for pagination:

        GOLD/P ..... WPS Page Marker   (soft page break)
        GOLD/PF2 ... WPS Paginate      (soft break for 54-line pages)
        GOLD/N ..... INSERT PAGE BREAK (hard page break; same as CTRL/L)
        PF2 ........ MOVE BY PAGE      (puts the cursor on a page break)

1 PAGINATE
 WPS Paginate (<Gold> PF2)
 
 Paginates using "soft" breaks (page markers).  A soft page break is a form
 feed followed by the null character (appearing as a small FF and a small
 NL).

 Steps:

    1.  Press the WPS Paginate key (GOLD/PF2).  WPE then moves back to the
        previous page break (if any) and checks ahead for page breaks
        within the next 'CT' lines.  (CT defaults to 60)

    2.  If soft breaks are found within the 'CT' lines, WPE removes them,
        then moves down 'CT' lines, inserts a soft break (if necessary), and
        puts the cursor on the next line.  You can repeat the operation to
        paginate further.

 If a hard page break is found (form feed only), WPE stops at that page
 break so you can remove it (using ERASE LINE) and then insert a soft break
 by pressing the WPS Page Marker key (GOLD/P).

 You may change 'CT' by pressing DO and then typing:
        Command: CT nn
 where nn is your desired value for 'CT'.
 
 Related topics:

    CTLENGTH          SET PAGE LENGTH
 
1 PARAGRAPH
 WPS Paragraph (KP5)

 Moves the cursor to the start of the next or previous paragraph, depending
 on the current direction of the buffer (shown in the status line).

 Steps:

    1.  If necessary, set the direction you want to move in.
        (Press KP0 for WPS Advance or KP1 for WPS Backup.)

    2.  Press the WPS Paragraph key (KP5).

 o  In forward direction (advance), the cursor moves to the start of the
    next paragraph, if there is one.  In reverse direction (backup), it
    moves to the start of the previous paragraph, if there is one.

 o  In EVE, "paragraphs" are bounded by any of the following:

       Blank lines      Top or bottom of the buffer
       Page breaks      RUNOFF commands (such as .Blank)

 o  In WPE, if you are editing a .TPU file, a "paragraph" is a TPU
    procedure, regardless of blank lines or page breaks.
 
 o  In WPE, if you are editing a .HLP file, the start of a
    "paragraph" is identified as a line which has a number 
    in column 1. 
 
 o  If there are no blank lines or other paragraph boundaries in the
    current direction, the cursor moves to the top or bottom of the buffer.
 
1 PRINT_TRANS
 Print Translated
 
 Copies the current buffer or select range to a new buffer (named
 TRANSLATE).  Control characters in the new buffer are then
 changed to a printable form (<ESC>, <BS>, etc.).
 
 The buffer is then printed to the device of your choice.
 
1 PRINT_UNTRANS
 Print Untranslated
 
 The buffer or select range is printed to the device of your choice.
 
1 QUOTE
 Quote (F7)

 Enters a control code or other character, either in text or in a command.

 Steps:

    1.  Use QUOTE or press F7 or CTRL/V.

    2.  Enter the control code or character (for example,
        press CTRL/[ for escape or CTRL/J for line feed).

 o  WPE enters the character according to the current mode of the buffer,
    as shown in the status line (insert or overstrike).  Some control codes
    appear as a backwards question mark.

 o  You can also use CTRL/V, or F7, in entering a string for FIND, 
    REPLACE, or WILDCARD FIND commands.  For example, if you have 
    set tabs to spaces or movement, you can search for tab characters 
    by doing the following:

        1.  Press FIND and at the prompt,
        2.  Press F7
        3.  Press TAB (or CTRL/I) for the tab character.
        4.  Press RETURN to complete the command.

 o  If you used the VAXTPU built-in DEFINE_KEY to define a typing key
    (letter, number, or punctuation mark) or a control key, you can use
    QUOTE to enter the character or control code normally bound to that
    key.  For example, if you have defined the tilde to execute a
    procedure, you insert a tilde by doing the following:

        1.  Press F7.
        2.  Type the tilde (~).

 Some characters (e.g., CTRL/S, CTRL/Q, CTRL/Y) cannot be inserted
 with QUOTE.  For these, press DO; then - for CTRL/Y (25) - type:
                tpu copy_text (ascii(25))
 
 The F7 (Quote) key invokes this command.
 
  VT100: CTRL/V                  Press the key to be added:
 
1 RETURN
 Return

 Inserts a new line before the current cursor position, moving the
 cursor to the start of the new line.
 
 As a convenience, if the file type is .FOR, a Tab character
 is inserted to start the new line.

 The RETURN key invokes this command.
 
1 RETURN_TO_EDIT
 Return To Editing (CTRL_F)

 Some TPU and WPE commands will leave you in a non-editing
 buffer.  The most common occurance is the SHOW buffer.  To
 return to the buffer you were editing, press Ctrl_F
 (press the Ctrl key simultaneously with either 'f' or 'F').

 Note that some "unusual" buffers are considered to be editing
 buffers (For instance, the MESSAGE buffer).  You can always
 use the Buffer command (or <Gold> F19) to select another buffer.
 
1 SELECT_BUFFER
 Select or Sel a BUFFER

 Puts a new buffer in the current window. The cursor moves to the
 position it was in the last time you used this buffer.
 
 In the CHOOSE A BUFFER display:
 
 1.  Move the cursor to the buffer you want to select.  (Anywhere
     on the line is sufficient). 

 2.  Press the Select , Sel, or Return key. 

 The selected buffer will now be in the current window.
 
 NOTE: The CHOOSE A BUFFER display is activated when you press
 <Gold> F19, and then press the up_arrow,
 
 Related topics:

    BUFFER

1 SET_KEYPAD_APP
 Set Keypad Application

 Cancels the NUMERIC keypad, restoring the keypad to the WPE state
 or the EDW state

 Effectively, this is the same as SET KEYPAD WPE or SET KEYPAD EDW.

 o  For a list of defined keys, see help on KEYS or press GOLD/HELP
    (on the mini keypad).

 o  For a keypad diagram, see help on KEYPAD or press HELP.

 Related topics:

    SET KEYPAD WPE   SET KEYPAD EDW

1 SET_KEYPAD_EDT
 Set Keypad EDT

 Sets the EDT-style keypad, defining the numeric keypad and other keys,
 but leaving most special WPE keys unchanged.

 o  PF1 is GOLD.  If you have already defined keys that EDT
    ordinarily defines, such as CTRL/U or GOLD/KP8, your definitions
    override the EDT definitions.

 o  To keep the EDT keypad for future sessions, use SAVE EXTENDED EVE to
    create a section file or put the command in an initialization file.

 o  For a list of defined keys, see help on KEYS or press GOLD/HELP.
    For a keypad diagram, see help on KEYPAD or press HELP.

1 SET_KEYPAD_EDW
 Set Keypad EDW

 Sets the EDT-style keypad, defining the numeric keypad and other keys,
 but leaving most special WPE keys unchanged.

 o  PF1 is GOLD.  If you have already defined keys that EDT
    ordinarily defines, such as CTRL/U or GOLD/KP8, your definitions
    override the EDT definitions.

 o  To keep the EDT keypad for future sessions, use SAVE EXTENDED EVE to
    create a section file or put the command in an initialization file.

 o  For a list of defined keys, see help on KEYS or press GOLD/HELP.
    For a keypad diagram, see help on KEYPAD or press HELP.

1 SET_KEY_NOEDT
 Set Keypad NoEDT

 Cancels the EDT keypad, restoring the keypad to the WPE state.

 Effectively, this is the same as SET KEYPAD WPS.

 o  For a list of defined keys, see help on KEYS or press GOLD/HELP
    (on the mini keypad).

 o  For a keypad diagram, see help on KEYPAD or press HELP.

 Related topics:

    SET KEYPAD EDT   SET KEYPAD WPS

1 SET_KEY_NOEDW
 Set Keypad NoEDW

 Cancels the EDT keypad, restoring the keypad to the WPE state.

 Effectively, this is the same as SET KEYPAD WPS.

 o  For a list of defined keys, see help on KEYS or press GOLD/HELP
    (on the mini keypad).

 o  For a keypad diagram, see help on KEYPAD or press HELP.

 Related topics:

    SET KEYPAD EDT   SET KEYPAD WPS

1 SET_KEY_NONUM
 Set Keypad NoNumeric

 Cancels the NUMERIC keypad, restoring the keypad to the WPE state
 or the EDW state

 Effectively, this is the same as SET KEYPAD WPE or SET KEYPAD EDW.

 o  For a list of defined keys, see help on KEYS or press GOLD/HELP
    (on the mini keypad).

 o  For a keypad diagram, see help on KEYPAD or press HELP.

 Related topics:

    SET KEYPAD WPE   SET KEYPAD EDW

1 SET_KEY_NOWPS
 Set Keypad NoWPS

 This command is not allowed in the WPE editor.

1 SET_KEYPAD_NUM
 Set Keypad Numeric

 Sets the default, numeric keypad, retaining previous definitions of
 other keys, such as EDT or WPS, except for the numeric.

 For example:

    o  The GOLD key may still be set.
    o  The four PF keys may still be defined.
    o  Pressing KP8 is the same as typing the number 8, pressing COMMA (on
       the keypad) is the same as typing a comma, and so on.

 For a keypad diagram, see help on KEYPAD or press HELP.
 For a list of defined keys, see help on KEYS.

1 SET_KEYPAD_WPE
 Set Keypad WPE

 Sets the WPS-style keypad, defining the numeric keypad and other keys, and
 sets the cursor to BOUND.

 o  PF1 is GOLD.  If you have already defined keys that WPS
    ordinarily defines, such as GOLD/R or KP0, your definitions override
    the WPS definitions.

 o  To keep the WPS keypad for future sessions, use SAVE EXTENDED EVE to
    create a section file or put the command in an initialization file.

 o  For a list of defined keys, see help on KEYS or press GOLD/HELP.
    For a keypad diagram, see help on KEYPAD or press HELP.

 Related topics:

    WPS DIFFERENCES   SET CURSOR BOUND   SET KEYPAD NOWPS
 
1 SET_KEYPAD_WPS
 Set Keypad WPS

 Sets the WPS-style keypad, defining the numeric keypad and other keys, and
 sets the cursor to BOUND.

 o  PF1 is GOLD.  If you have already defined keys that WPS
    ordinarily defines, such as GOLD/R or KP0, your definitions override
    the WPS definitions.

 o  To keep the WPS keypad for future sessions, use SAVE EXTENDED EVE to
    create a section file or put the command in an initialization file.

 o  For a list of defined keys, see help on KEYS or press GOLD/HELP.
    For a keypad diagram, see help on KEYPAD or press HELP.

 Related topics:

    WPS DIFFERENCES   SET CURSOR BOUND   SET KEYPAD NOWPS
 
1 SET_PAGE_LENGTH
 Set Page Length
 
 The Current Text Length (CT) governs the length of the page that
 is used by the PAGINATE function (<Gold> PF2).  
 
 The default value for CT is 60 lines per page.  To change it,
 press the DO key.  Enter Command: SET PAGE LENGTH and the new
 value you wish to use.
 
1 SHIFT_LEFT
 Start Of Line / Shift Left

 Moves the cursor to the start of the current line, unless you are
 already there.  If you are already at the start of a line, your
 viewpoint may be moved to the left.
 
 When you type or recall a command, pressing GOLD/LEFT arrow moves
 the cursor to the start of the command line.
 
 If your viewpoint is shifted to the right, placing the cursor at
 the start of a line and then pressing GOLD/LEFT arrow  will allow
 you to view text farther to the left.  The text actually moves to
 the right by 8 columns.  Repeating the command moves your
 viewpoint 8 more columns to the left each time, until your
 viewpoint is no longer shifted.

 Keys:  WPE defines CTRL/H and GOLD/LEFT arrow as START OF LINE.
 
1 SHIFT_RIGHT
 End Of Line / Shift Right

 Moves the cursor to the end of the current line, unless you are
 already there.  If you are already at the end of a line, shifts
 your viewpoint to the right by 8 columns.

 When you type or recall a command, pressing GOLD/RIGHT arrow
 moves the cursor to the end of the command line.
 
 If your text is too long to fit on a single screen, placing the
 cursor at the end of a line and then pressing GOLD/RIGHT arrow
 will allow you to view text farther to the right.  The text
 actually moves to the left by 8 columns.  Repeating the command
 moves your viewpoint 8 more columns to the right each time.

 Keys:  WPE defines GOLD/RIGHT arrow as END OF LINE / SHIFT RIGHT.

1 SIGNATURE
 Signature (<Gold> @)

 Copies a file (SYS$LOGIN:SIGNATURE.WPE) from your login (root)
 directory into the buffer you are currently editing.  The
 file can be anything you wish.
 
 This is called the Signature function because it is often
 used to put a standard signature block (plain or fancy) in
 a memo or document.
 
 Press <Gold> @ to insert the standard file.
 
1 SPECIAL_COMDS
 WPE Commands which are not available as single keys:
 
 Press    Do    and enter the Command:       
 
 Command: CT nn - To change the Current Text length. (Set Page Length)
 
 Command: Print - To print a copy of the current buffer or select
                range, with or without control characters translated
                to printable form. (Formatted or Unformatted)
 
 Command: Fix - To create a copy of the current buffer
                with CR and LF characters properly removed.
                This command is often used to convert .MEM
                files to a more reasonable format.
 
 Command: Numeric - To change to Numeric Keypad.
 
 Command: Application - To change to Application Keypad.
 
 Command: Notab - To replace all tabs with spaces, and
                redefine the TAB key to insert spaces.
 
 Command: EtoA - To translate the entire buffer, or a
                selected part, from EBCDIC to ASCII
 
 Command: AtoE - To translate the entire buffer, or a
                selected part, from ASCII to EBCDIC
 
1 TOKEN 
 Paired Token 
 
 Places a pair of items in your text, and positions the cursor
 so that you can easily enter text between the items.  This
 function is only useful if you are in Insert mode.
 
        Press                           To get:
        <Gold> ( or <Gold> )            () 
        <Gold> { or <Gold> }            [] 
        <Gold> "                        "" 
 
1 TWO_WINDOWS
 Two Windows (F18)

 Splits the current window into two windows.  This lets you view different
 buffers at the same time or different parts of the same buffer.

 o  The cursor appears in the new, lower window.  Each window has its own
    status line and displays the buffer you are currently editing.

 o  To put a different file in the new window, use the <Gold> F18,
    or <Gold>G command.  See help on these keys.

 o  To form three or more windows, use F18 repetitively. The 
    maximum number of windows in EVE depends on the size and type 
    of terminal you are using.

 Related topics:

    help on keys F17, F19
    DELETE WINDOW    ENLARGE WINDOW     NEXT WINDOW      ONE WINDOW
    OTHER WINDOW     PREVIOUS WINDOW    SHRINK WINDOW    SPLIT WINDOW
 
1 VT100_COMMANDS
 Since VT100 terminals don't have a DO key, you must press
 <Gold> [ before entering special (WPE or EVE) commands.
  <Gold> [  (DO)                 Command:        

 Command: buffer test.txt - Change to buffer with this name.
 Command: get file test.txt - New file & new buffer.
 Command: one window - One window editing (from 2).
 Command: two windows - Two window editing (from 1).
 Command: other - Move cursor to other window.
 Command: forward - Change direction to Forward.
 Command: reverse - Change direction to Reverse.
 Command: insert mode - Change to Insert mode.
 Command: overstrike - Change to Overstrike mode.
 Command: CT nn - To change the Current Text length.
 Command: fix - Removes CR and LF from the buffer.
 Command: print - Prints buffer/range (can translate controls).
 Command: numeric - To change to Numeric Keypad.
 Command: application - To change to Application Keypad.
 Command: help - For HELP on these and other WPE commands.
 Command: EtoA - Translate EBCDIC to ASCII
 Command: AtoE - Translate ASCII to EBCDIC
  
 Press CTRL/V to invoke the QUOTE function.
 
1 VIEW
 View (<Gold> V)
 
 Makes Tab characters visible on the screen, to facilitate
 editing in some situations.
 
 Press <Gold> V to invoke this function.

 Press <Gold> V again to turn off viewing of Tabs.
 
 
 NOTE: For text with graphics controls (line drawings, etc.), you
 may occasionally need to set the display to display the actual
 appearance, rather than the controls.  For this, press DO; then type:
 
        tpu set (text, current_window, no_translate)
 
 Pressing <Gold> V turns off no_translate mode.
 
1 WPS_DIFFERENCES
 WPS Differences

 SET KEYPAD WPS provides most keypad functions of WPS-8, WPS-PLUS/VMS, and
 DPE.  It does NOT fully implement or emulate WPS.  Here is a list of
 differences between the WPS keypad in WPE and real WPS:

 Keys:

    o  The WPS keypad defines GOLD/[ as DO for typing WPE commands.  
       CTRL/K and CTRL/L are defined as LEARN.  To end a learn sequence,
       press REMEMBER (CTRL/R key) or the WPS Halt key (GOLD/`).

 Rulers:

    When you use a WPS ruler (GOLD/R key), only one ruler is active at a
    time.  Rulers cannot be embedded in a document.  Setting margins does
    NOT automatically rewrap or reformat text.  To reformat text with new
    margins, use FILL commands.  For more information, see help on RULER
    KEYS.

 Scrolling:

    Scrolling (with WPS keypad functions) is halted when you press any key
    -- not just the WPS Halt key (GOLD/`).  Pressing that key executes
    whatever function is assigned to it.

 Free/Bound cursor:

    Setting the WPS keypad automatically sets the cursor to BOUND, which
    follows the shape of your text.  To enable a free cursor, use SET
    CURSOR FREE, which is otherwise the EVE default setting.

 Page Breaks and Pagination:

    o  A "hard" page break is a form feed (appearing as a small FF on a
       line by itself).  A "soft" page break is a form feed followed by the
       null character (a small NL).

    o  The WPS keypad defines the following keys for pagination functions:

       GOLD/P ..... WPS Page Marker   (soft page break)
       GOLD/PF2 ... WPS Paginate      (soft break for 54-line pages)
       GOLD/N ..... INSERT PAGE BREAK (hard page break; same as CTRL/L)
       PF2 ........ MOVE BY PAGE      (puts the cursor on a page break)

       For more information, see help on the relevant keypad functions.

 Searches:

    Searches follow the EVE rules for case sensitivity and direction.  For
    more information, see help on FIND.

 Paragraph Boundaries:

    Paragraphs are bounded by blank lines, the top or bottom of the buffer,
    page breaks, or RUNOFF commands (such as .B).

 Centering a Line:

    The WPS keypad defines GOLD/C as CENTER LINE, which uses spaces to
    center the line and does NOT leave a centering mark.

 Exiting:

    The WPS keypad defines GOLD/F as EXIT.  Exiting does NOT delete the old
    version of the input file.

 SELECT

    With the WPS keypad, SELECT sets the direction to FORWARD.

 HELP:

    For a keypad diagram, press HELP (or Gold H).  For a
    list of all key definitions, press GOLD/HELP.

 Features NOT Implemented:

    o  Abbreviation or library documents
    o  Bold-, reverse-, or underline-highlighting
    o  Control commands for printing
    o  Cut and paste between separate editing sessions
    o  Editor math
    o  Footnotes, paragraph numbering, and table of contents
    o  Hyphenation and non-breaking spaces
    o  Output files other than ASCII
    o  Superscripts, subscripts, or composite characters
    o  TDE (two-dimension editor)
    o  UDP (user-defined WPS procedures)
    o  Word-wrap returns (In WPE, all lines end in a "hard" return.)

1 WRITE_FILE
 Write File (<Gold> W)

 The WRITE FILE command places the some or all of the contents of
 the current buffer in the file you specify.  When you press
 <Gold> W, you will be prompted for a File to write to: 
 
 If you have established a Select Region, the contents
 of the region will be written to the file you specify.  If
 you do not have a Select Region, the entire buffer
 will be written.
 
 If you specify the same file name as the current buffer, a
 new version of the file you are editing will be written. 
 Of course, you may also write the file with a different name.
 
 WRITE FILE is often used to save parts of a file under different
 names.  It will also allow you to save the results of "editing"
 a file when you are using the MORE utility.
 
 The <Gold> W key invokes the WRITE FILE function.

