-- $Id: BUGS,v 1.5 1996/11/17 12:44:08 tom Exp $ Please report bugs to dickey@clark.net This is a list of known problems with VTTEST: + SD and SU tests pass with dtterm, but not with VT420, which uses a different scrolling model. + the skip_csi/skip_dcs functions are too permissive (they're allowing either 8-bit or 7-bit responses). + when I test the DECRQSS responses on a VT420, they usually come back with a code '1' (according to my manual, that's invalid), though the data looks correct otherwise. + testing on a VT420 (console on VMS), there's a problem with the VT52 test: I see highlighted glitches at the positions where erase line (ESC K) controls are printed. Increasing the padding doesn't change this behavior.